 |
|
|
|
|
|
|
Model 54 Impedance Bridge and Temperature Controller |
 |
 |
The model 54 is a next generation four channel cryogenic impedance bridge capable of measuring resistance, inductance and mutual-inductance. Additionally, four control loop outputs support use as a temperature controller.
Standard remote interfaces include Ethernet and USB. IEEE-488(GPIB) is optional.
Model
54 Product Folder>>
|
|
|
|
|
|
|
|
Model 26C High Power Output Temperature
Controller |
 |
 |
The Model 26C is a four-input, four control loop temperature controller designed for cryogenic applications where high output power is required. Each input is independent and capable of temperature measurement to <100mK with an appropriate temperature sensor.
The Four-output control loop circuits feature a primary 100W heater, a secondary heater of 50W and two 10/5 -Volt non-powered outputs. All control modes are supported by all outputs.
Large, bright and highly configurable display.
Standard remote interfaces include Ethernet and USB. IEEE-488(GPIB) is optional.
Model
26C Product Folder>>
|
|
|
|
|
|
|
|
Model 24C Cryogenic Temperature
Controller |
 |
 |
The Model 24C is a four-input, four control loop cryogenic temperature controller designed for general purpose laboratory and industrial use. Each input is independent and capable of temperature measurement to <100mK with an appropriate temperature sensor.
The Four-output control loop circuits feature a primary 50W heater, a secondary heater of 25W and two 10/5 -Volt non-powered outputs. All control modes are supported by all outputs.
Large, bright and highly configurable display.
Standard remote interfaces include Ethernet and RS-232. IEEE-488(GPIB) is optional.
Model
24C Product Folder>>
|
|
|
|
|
|
|
|
Model 22C Cryogenic Temperature
Controller |
 |
 |
The Model 22C is a two-input, four control loop cryogenic temperature controller designed for general purpose laboratory and industrial use. Each input is independent and capable of temperature measurement to <200mK with an appropriate temperature sensor.
The Four-output control loop circuits feature a primary 50W heater, a secondary heater of 25W and two 10/5 -Volt non-powered outputs. All control modes are supported by all outputs.
Large, bright and highly configurable display.
Standard remote interfaces include Ethernet and USB. IEEE-488(GPIB) is optional.
Model
22C Product Folder>>
|
|
|
|
|
|
|
|
Model 18i / 14i / 12i Cryogenic Temperature Monitors |
 |
 |
Cryogenic temperature monitors with eight, four or two multipurpose input channels that support Diode, Platinum RTD and most cryogenic NTC temperature sensors.
Operation from 500mK to over 1,200K with appropriate sensor.
Industrial grade security: Configurable firewall, HTTPS encryption and authentication. Modbus industrial protocol supports direct connection to most PLCs.
Two big 10A dry-contact relay outputs.
Remote interface is Ethernet.
Model
18i / 14i / 12i Product Folder>>
|
|
|
|
|
|
|